Support for vibration insulation made in stripe in rubber from recycling of Pfu
STRIPE 50 / 500
Description
- High performance in reduced thickness
- Easy to lay
- Durable material
Anti-vibration bearing in the thickness of 50 mm, produced using fibres and granules of End-of-Life Tyres (ELTs) and granules of EPDM rubber (Ethylene Propylene Diene Monomer), selected and compacted using a polyurethane glue in a hot process. A non-woven, non-stretch waperproof synthetic membrane is applied on one side of the bearings, for added protection; density 500 kg/m³. Stripe dimensions are 200 mm lenght, 1000 mm width.
Additional information
| Type | Anti-vibration |
|---|---|
| Thickness (mm) | 50 |
| Traffic load (N/mm²) | 1,00 |
Application's fields
- Isolation of inertial bases for HVAC, generators, etc.
- Isolation of building foundations from vibrations coming from the ground as linear support
